Installing a Random-access
Memory module
Upgrade the memory capacity of your Notebook PC by installing a RAM
(random-access memory module) in the memory module compartment.
The following steps show you how to install a RAM module into your
Notebook PC:
IMPORTANT! Purchase an RAM module from authorized retailers of this
Notebook PC to ensure maximum compatibility and reliability.
WARNING! Disconnect all the connected peripherals, any telephone or
telecommunication lines and power connector (such as external power
supply, battery pack, etc.) before removing the compartment cover.
NOTES:
• The appearance of your Notebook PC’s bottom side and RAM module
may vary per model but the module installation remains the same.
• It is recommended that you install the RAM module under
professional supervision. You may also visit an authorized service
center for further assistance.
106
Notebook PC E-Manual
A.
Place the notebook on a clean, flat, and stable surface.
B.
Pull the rubber cover to expose the screw on the compartment
cover.
IMPORTANT! The rubber cover is designed to be attached to notebook’s
compartment cover. Do NOT force to detach it or completely remove it
from the compartment cover.
C.
Loosen the screw of the compartment cover.
IMPORTANT! The screw is designed to be attached to Notebook’s
compartment cover. Do NOT force to remove it.
Notebook PC E-Manual
107
D.
Hold the rubber cover and carefully pull it just enough to detach
the compartment cover from the Notebook PC.
E.
Remove the compartment cover completely then set aside.
rubber cover
compartment cover
108
Notebook PC E-Manual
H.
Align and replace the compartment cover.
F.
Align and insert the RAM module into the RAM module slot.
G.
Push down the RAM module until it clicks in place.
Notebook PC E-Manual
109
I
Reattach and tighten the screw that you removed earlier.
J.
Replace the rubber cover on the compartment cover.
rubber cover
screw
110
Notebook PC E-Manual
Notebook PC E-Manual
111